Melbourne Termite Control

Termite Services

Termite Services

The cost of termite treatment in Melbourne can vary hugely from a few hundred dollars to a few thousand dollars, and this depends on a number of factors including the extent of termite damage and infestation, and the type of termites you have.

AS 3660.1

Termite protection is required in accordance with AS3660.1 (protection of new construction from subterranean termites) provides details for low risks to buildings from termite invasion, and ways to treat for termite invasions. A full, complete termite barrier will withhold termite entry points to your home. As a homeowner, it is your care to certify that your home has the right treatment, at least once every 12 months as an inspection, to detect any termite infestation Melbourne.

Baiting Stations

Termite bait station. Trelona is installed to monitor and wipe out termites around your home. Melbourne Termite provides an extent of baiting systems individually designed and fitted to suit your situation. We are not tied by any one provider and can accordingly recommend the best alternative, which may be a mixture of systems and treatments. We always convert and update our awareness base to allow you the most successful protection attainable.

Certificate AS 3660.1

Spraying for termite treatment part a & a part b to all new commercial factory and warehouse, new extensions to homes, footing spray, house renovations, subfloor, timber deck sprays and house stump chemical sprays for part a, and part b. We can install any type of physical or chemical barrier in accordance with the code AS3660.1 before or after any work has been completed, certificates are certified by a professional termite controller in Melbourne.

Chemical Treatments

Chemical treatments shied away termites entering the factory or building, so you can either have a pinpoint treatment or a full circumference treatment. A located termite revocation treatment is designed to discourage termites from entering a particular (small) zone of the building. A full circumference treatment is intended to protect the whole construction. It is for this reasoning that Melbourne Termites do not generally recommend a locate treatment. Two general non-repellent chemicals are Biflex (five years residual life) and Termidor (Up to eight years residual life). We recommended choice in repellent chemical is Termidor HE (up to 10 years residual life).

as3660 in melbourne
Pin Point

Spraying for termite treatment part a & a part b to all new commercial factory and warehouse, new extensions to homes, footing spray, house renovations, subfloor, timber deck sprays and house stump chemical sprays for part a, and part b. We can install any type of physical or chemical barrier in accordance with the code AS3660.1 before or after any work has been completed, certificates are certified by a professional termite controller in Melbourne.

Termite Certificate As3660.1

Depending on when the concrete slab needs protection by your council or building surveyor needed to install termite protection, nonetheless, we highly advise that you do this. Installing termite protection below the concrete slab is called a termite collar (penetration) – if you don't do this, you will need to pierce and inject the slab to get your certificate of compliance AS3660.1. When building a new house on a slab, or extension on sumps, or just a small renovation in Melbourne, you will need to get this signed off by your building surveyor, and they will ask for a termite protection part a and part b certificate of compliance AS3660.1 in Melbourne, and if the builder has not done this scope of works, then the surveyor will not sign off the job to get your certificate of occupancy, prices can start from $550 upwards.

Reticulation System

Chemical impediment systems are generally used in combination with slab-on-ground erection. Conventional chemical treatments include a chemical reticulation system under the slab and around the perimeter of the building. AS 3660.1 define the process to provide a chemical system that will discourage termites from obtaining concealed admission to termite-susceptible sentence structure in the building. Section 8 of the Standard does not refer to any specific chemical. However, it allows us of any compound that is registered for the proposal by (APVMA).

Treatment Types

Termite Sprays/Foams: Termidor® Foam has been specifically made as a dry foam that builds and holds in place, ensuring the action is evenly spread throughout the infested area. With the added advantage of an unsurpassed 25:1 expansion ratio, Termidor Foam will permeate intricate termite workings and carton material without dissipating and turning to water as other foams drip away. Termidor Foam should be applied directly to termite walls (including bivouacs) in trees, stumps, posts, power poles, mounds, and wall cavities. Termidor Foam can also apply to termite activity when the nest cannot be located, such as active workings in timber and wall cavities and sometimes in bait stations.

Request a call back
CONTACT US FOR FREE ADVICE TODAY